Chapter 8. Quick Setup
Dial 128K sync*
When the ISU 2x64 is configured for Dial 128K sync service, the following parameters are automatically preset:
Service type | ISDN dial line |
Automatic answering | Enabled |
ISDN call type | 64 kbps data |
Data protocol | BONDING mode 1 |
DTE mode | Synchronous |
DTE connector bit rate | 128 kbps |
DTE flow control | none |
RTS line | 1 mS delay |
CTS line | Forced On |
Transmit data clock | Internal clock source |
BONDING timer TXINIT | 10 seconds |
BONDING timer TXFA | 10 seconds |
BONDING timer TXADD01 | 50 seconds |
BONDING timer TXDEQ | 50 seconds |
BONDING timer TANULL | 10 seconds |
BONDING timer TCID | 5 seconds |
Dial 57.6 asyn*
When the ISU 2x64 is configured for Dial 57.6 asyn service, the fol- lowing parameters are automatically preset.
Service type | ISDN Dial line |
ISDN call type | 64 kbps data |
Data Protocol | V.120 |
DTE mode | Asynchronous |
Data Bits | 8 |
Parity Bits | none |
Stop Bits | 1 |
DTE connector bit rate | 57.6 kbps |
DTE flow control | none |
RTS line | 1 mS delay |
CTS line | Forced On |
Dialing Mode | AT Commands |
68 | ISU 2x64 Dual Port ISDN Service Unit User Manual |
