Chapter 9. Security and Remote Configuration

Cfg. Rmt. Unit

Cfg. Rmt. Unit causes the ISU 2x64 to place a call to a remote ISU for configuration. The user is prompted for the number to dial and the password for accessing the remote unit. After the call is placed, the local unit sends the entered password to the remote unit. If the password is correct, the remote unit confirms the pass- word and configuration is allowed. If the remote unit has no pass- word defined, press Enter at the prompt.

Set Password

Set Password prompts the user to enter a six digit numeric code that musts be supplied when a remote configuration call is re- ceived. This password is the same as the password for front panel keypad locking. The default state is nothing entered in the pass- word option.

Lpbk remote 1B

Lpbk remote 1B causes the ISU 2x64 to make a call to a remote ISU and place the remote ISU into a 1B-channel loopback. When the remoted unit is looped back, the local unit will send a test pattern (2047) to the remote unit and verify that the test pattern comes back uncorrupted. The user is prompted for the number to dial. Negotiation progress is displayed while the loopback call is in progress. Total bytes and Error bytes are displayed upon connec- tion success. The Cancel key disconnects the call at any time.

Lpbk remote 2B

Lpbk remote 2B causes the ISU 2x64 to make a call to a remote ISU and place the remote ISU into a 2B-channel loopback. When the remoted unit is looped back, the local unit will send a test pattern (2047) to the remote unit and verify that the test pattern comes back uncorrupted. The user is prompted for the number to dial. Negotiation progress is displayed while the loopback call is in progress. Total bytes and Error bytes are displayed upon connec- tion success. The Cancel key disconnects the call at any time.

61200051L1-1D

ISU 2x64 Dual Port ISDN Service Unit User Manual

75

Page 89
Image 89
ADTRAN ISU 2X64 user manual Cfg. Rmt. Unit, Lpbk remote 1B, Lpbk remote 2B