Chapter 8. Quick Setup
Dial 64K sync*
When the ISU 2x64 is configured for Dial 64K sync service, the fol- lowing parameters are automatically preset:
Service type | ISDN dial line |
Automatic answering | Enabled |
ISDN call type | 64 kbps data |
Data protocol | Clear Channel |
DTE mode | Synchronous |
DTE connector bit rate | 64 kbps |
DTE flow control | none |
RTS line | 1 mS delay |
CTS line | Forced on |
Transmit data clock | Normal clock source |
V.54 Loopbacks | Accepted |
Dial 112K sync*
When the ISU 2x64 is configured for Dial 112K sync service, the following parameters are automatically preset:
Service type | ISDN dial line |
Automatic answering | Enabled |
ISDN call type | 56 kbps data |
Data protocol | BONDING mode 1 |
DTE mode | Synchronous |
DTE connector bit rate | 112 kbps |
DTE flow control | none |
RTS line | 1 mS delay |
CTS line | Forced On |
Transmit data clock | Internal clock source |
BONDING timer TXINIT | 10 seconds |
BONDING timer TXFA | 10 seconds |
BONDING timer TXADD01 | 50 seconds |
BONDING timer TXDEQ | 50 seconds |
BONDING timer TANULL | 10 seconds |
BONDING timer TCID | 5 seconds |
ISU 2x64 Dual Port ISDN Service Unit User Manual | 67 |
