ADTRAN ISU 2X64 user manual Setting Protocol Options, Protocol Menu Tree

Chapter 6. Configuration

Setting Protocol Options

The ISU 2x64 communicates with many different types of tele- communication equipment including other ISU 2x64s, ISDN ter- minal adapters, Switched 56 DSUs, and BONDING-compatible inverse multiplexers. Communicating between such diverse types of equipment requires various rate adaptation protocols to support various bit rates and DTE settings. See Figure 6-21 for the menu tree. The ISU 2x64 supports the following rate adapta- tion protocols:

•Clear Channel (no rate adaptation protocol) (synch. only)

•BONDING mode 1 (Bandwidth on Demand Interoperability Group)

•CCITT V.120

•CCITT V.110

•DSU 57.6 ASYNC

•T-LINK (Dial DDS DSU/CSU)

•SAP (Simple ADTRAN Protocol)

•FALLBACK

•PPP async-sync

3=CONFIG

1=Netw. options

2=DTE options

3=Protocol

4=Quick setup

5=Security

6=Remote Config

1=Clear Channel

2=BONDING mode 1

3=V.120

4=V.110

5=DSU 57.6 ASYNC

6=T-LINK

7=SAP

8=FALLBACK

9=PPP async-sync

Figure 6-21

Protocol Menu Tree

See Recommended Operating Protocols on page 6 for more informa- tion on recommended modes of operation.

The desired protocol may be selected with AT commands at the DTE port or from the ISU 2x64 front panel. A description of pro- tocols follows.

61200051L1-1D ISU 2x64 Dual Port ISDN Service Unit User Manual 55