ADTRAN L128T user manual Status/IPX Routes

Chapter 3: Terminal Menu Operation and Structure

IP Routes/Hops - Number of routers that must go through to get to destination. Ranges from 0-15 or 16 for infinite (can’t get there from here).

IP Routes/TTL - Seconds until address is removed from table or “zombied.” Value of 999 means route is static.

Status/IPX Routes

Read security: 5

This lists the contents of the Express L128/L128T’s IPX router table.

IPX Routes /Network - Network destination address

IPX Routes /Gateway - Node or Ethernet address of gateway to receive this packet

IPX Routes /Port - Port gateway is located on:

local - sent directly to the Express L128/L128T router eth0 - Express L128/L128T’s ethernet port

wan0 - Express L128/L128T’s first PPP bundle wan1 - Express L128/L128T’s second PPP bundle

idle - non-connected or “spoofed” route used for dial-on-demand

IPX Routes /Use - Number of times the Express L128/L128T has referenced the route

IPX Routes/Hops - Number of routers that must go through to get to destination. Ranges from 0-15 or 16 for infinite (can’t get there from here).

IPX Routes/Ticks - Router determined value for representing time packets take to reach the network destination. One tick is equivalent to one-eighteenth of a second.

IPX Routes/TTL - Seconds until address is removed from table.

Value of 999 means route is static.

94 Express L128/L128T User Manual 61202.070L1-1