Appendix B: Log Messages

Connected <number> level 5

A call from or to <number> was connected. If no caller ID is available for the ISDN line then <number> will be blank for incoming calls.

Demand calling ‘<user>’ level 4

A new call is being placed due to incoming packet routed to “idle” interface or bridge packet passing through demand filter. The Connection List profile used is the one with <user> in the description field.

DEST NOT ISDN level 4

The number dialed is not ISDN. This is a warning and is most often seen for POTS calls.

Dial <number> level 5

The Express L128/L128T is dialing <number>.

Dialing ...

level 5

A phone on the Express L128/L128T POTS port is dialing.

Disconnect <number> level 5

A call from or to <number> was disconnected. If no caller ID is available for the ISDN line, then <number> will be blank for incoming calls.

Dump <number> level 5

A call or call attempt to or from <number> has been refused. If no caller ID is available for the ISDN line, then <number> will be blank for incoming calls.

Dump call level 3

The Express L128/L128T has dropped an incoming call because it was busy with calls.

130

Express L128/L128T User Manual

61202.070L1-1

Page 147
Image 147
ADTRAN L128T user manual 130