Appendix A
Loop Status Messages
The Express L128/L128T displays current loop status of the ISDN on the bot- tom center line of the terminal screen. The following messages are defined:
AutoSpid Download
The Express L128/L128T is performing the LUCENT SPID download feature.
AutoSpid X
A SPID is being attempted by ExpertISDN. X starts at 0 and counts up for each SPID format.
CALL <number>
The Express L128/L128T is dialing the number.
Call Connect B1
Bearer channel B1 is active with a call.
Call Connect B2
Bearer channel B2 is active with a call.
Call Connect B1/B2
Bearer channels B1 and B2 are active with a call.
Connected 64K/2X64K/128K/144K
When the Express L128/L128T is in leased mode, this will appear when the link’s layer 1 is up. The rate is determined by what it is configured for under Configuration/WAN/ISDN/Leased/Rate.
DISCONNECTING
A call is in the process of being disconnected.
DMS-100 Ready
The ISDN link layers 1 through 3 are up against a Nortel
Express L128/L128T User Manual | 117 |
