Appendix F: Frame Relay Firmware Version
IPXCP - Shows UP if PPP IPX Control Protocol has negotiated successfully
User - Displays the user name of the PPP peer
Number(s) - Shows the phone number dialed if outgoing call or caller ID if incoming call.
Connect Time - Shows the date and time when the call last connected. Up Time - Displays how long the call has been connected.
Tx Pkts - Number of packets transmitted
Rx Pkts - Number of packets received
Tx Bytes - Number of bytes transmitted
Rx Bytes - Number of bytes received
Tx Rate - Current application data transmission rate
Rx Rate - Current application data reception rate
Tx Link Rate - Current actual data transmission rate
Rx Link Rate - Current actual data reception rate
Sessions/DLCI Table
The status of all virtual circuits is displayed here.
DLCI - The DLCI that is associated with this virtual circuit.
State - The state of the virtual circuit:
Inactive - means the circuit exists but has been deactivated by the Frame Relay switch.
Exists - means the circuit exists at this point and should be activated soon.
Active - means the circuit is fully active.
Off - means the circuit has been turned of by the DLCI mapping active selection.
Tx Frames - Number of Frame Relay packets that have been transmitted via this DLCI.
158 | Express L128/L128T User Manual |
