ADTRAN L128T user manual No IP addr for peer level

Models: L128T L128

1 200
Download 200 pages 61.82 Kb
Page 141
Image 141
No IP addr for peer level 2

Appendix B: Log Messages

No IP addr for peer level 2

The Express L128/L128T cannot continue the connection because there was no IP address received from the PPP peer or it was not set in Configuration/Con- nection List/IP/Route/IP/Net parameter.

No more bundles avail level 3

The Express L128/L128T cannot bundle more than two Multilink sessions at one time.

No Response from peer level 2

The Express L128/L128T has dialed or answered a call and no PPP negotiation packets were seen.

PAP authen failed level 3

The PPP peer has rejected the Express L128/L128T’s username and/or pass- word used for authenticating. Check to make sure the Configuration/Con- nection List/Authentication parameters Tx Method, Tx Username, and Tx Password are correct.

Peer failed CHAP authen level 3

The PPP peer’s reported CHAP username and/or password does not match the Express L128/L128T’s parameters. This is most likely caused by PPP peer sending an incorrect username and/or password. Make sure the Configura- tion/Connection List/Authentication parameters Rx Username and Rx Pass- word are correctly entered. Also, if using RADIUS, check that the server is configured and running properly.

Peer failed EAP authen level 3

The PPP peer’s reported EAP username and/or password does not match the Express L128/L128T’s parameters. This is most likely caused by PPP peer sending incorrect username and/or password. Make sure the Configuration/ Connection List/Authentication parameters Rx Username and Rx Password are correctly entered. Also, if using RADIUS, check that the server is config- ured and running properly.

124

Express L128/L128T User Manual

61202.070L1-1

Page 141
Image 141
ADTRAN L128T user manual No IP addr for peer level