ADTRAN L128T PPP/Max Timer, PPP/Max Failure, Connection List/Dial Out, Dial Out/Number

Chapter 3: Terminal Menu Operation and Structure

PPP/Max Timer

Write security: 3; Read security: 5

This value is the number of seconds to wait between unanswered configura- tion-requests. The possible values are 1 sec, 2 secs (def), 3 secs, 5 secs and 10 secs.

PPP/Max Failure

Write security: 3; Read security: 5

Due to the nature of PPP, configuration options may not be agreed upon be- tween two PPP peers. This value is the number of configuration-naks that should occur before an option is configuration-rejected. This allows a connec- tion to succeed that might otherwise fail. The possible values are 5 (def), 10, 15 and 20.

Connection List/Dial Out

The dialing parameters for establishing this connection are defined under this menu.

Dial Out/Number 1

Write security: 3; Read security: 5

This is the first number used for dialing up this connection.

Dial Out/Number 2

Write security: 3; Read security: 5

This is the second number used for dialing a second B-channel when adding bandwidth. If BACP/BAP is negotiated, this number is not necessary. If this number is not specified and BACP/BAP is not used, the Number 1 number is re-dialed when adding bandwidth.

Dial Out/Call Type

Write security: 3; Read security: 5

The call type can be configured in four different ways:

Speech - Speech directs the call control software to request a Mu-law encoded speech circuit as the bearer capability for the outgoing calls. The speech option is used with an ISDN line

61202.070L1-1 Express L128/L128T User Manual 75