ADTRAN L128T user manual Test Menu/Echo Request, Test Menu/Dial Self, Test Screen

Chapter 3: Terminal Menu Operation and Structure

TEST MENU

The Express L128/L128T’s Test menu contains built in tests that can be used to diagnose problems. Figure 3-12 shows the Test menu screen.

Figure 3-12

Test Screen

The following tests can be run:

Test Menu/Echo Request

Write security: 4, Read security: 5

When activated, the echo request test will begin sending continuous PPP echo request packets to any open LCP ports. Results are displayed on the screen. At least one PPP session must be up.

Test Menu/Dial Self

Write security: 4, Read security: 5

The dial self-test can be activated to check the ISDN parameters set under the Configuration/WAN/ISDN menu. This test starts the Express L128/L128T dialing itself using the configured LDN numbers. Once a connection is estab- lished, it will send PPP echo request until the test is terminated. Any error or success messages will appear on the screen.

98 Express L128/L128T User Manual 61202.070L1-1