Appendix E: Terminal Mode Commands
| One of the following key words must be used first: |
info | Goes directly to ConÞguration/System Info menu. |
isdn | Goes directly to ConÞguration/WAN/ISDN menu. |
pots | Goes directly to ConÞguration/WAN/POTS menu. |
ip | Goes directly to ConÞguration/IP menu. |
ipx | Goes directly to ConÞguration/IPX menu. |
bridge | Goes directly to ConÞguration/Bridge menu. |
security | Goes directly to ConÞguration/Security menu. |
connect | Goes directly to ConÞguration/Connection List menu. |
telnet | Goes directly to ConÞguration/Management/Telnet menu. |
snmp | Goes directly to ConÞguration/Management/SNMP menu. |
maint | Goes directly to ConÞguration/Management/Maint menu. |
dial | Goes directly to ConÞguration/Dial menu. |
status | Goes directly to ConÞguration/Status menu. |
test | Goes directly to ConÞguration/Test menu. |
logs | Goes directly to ConÞguration/Logs menu. |
util | Goes directly to ConÞguration/Utilities menu. |
Some examples are listed below: |
|
isdn spid_1 20555512340101 | sets spid 1 |
telnet user 1 name ÒguestÓ | sets user name for telnet user list entry 1 |
| to “guest” |
dial 3 dial | dials the numbers for connection list |
| profile number 3 |
status ip 1 gateway | returns the gateway address for IP route |
| table entry 1 |
146 | Express L128/L128T User Manual |
