Appendix E: Terminal Mode Commands
Additional Commands
Other commands available from the terminal mode are given below:
save | Saves the configuration to |
mac | Returns the MAC address for the Express L128/L128T. |
version | Returns the firmware version and routing stack version. |
reset | Resets the unit. |
exit | Leaves terminal mode and returns to menus. |
download | Downloads complete configuration to the terminal screen for |
| capture. |
Download/Uploading Configuration
The Express L128/L128T’s configuration can be captured to a text file using the download command. The text file can be edited if required. Upload of the configuration can be accomplished by sending the text file to the Express L128/L128T in terminal mode. A baud rate of 9600 is strongly recommended when uploading. As soon as the upload has been completed, type “save” to save the new configuration to flash. A “reset” command or power cycle 10 sec- onds after the save command is recommended to ensure that the new config- uration is complete.
Express L128/L128T User Manual | 147 |
