Chapter 3: Terminal Menu Operation and Structure
When bandwidth is needed for another application, the idle timer is compared to this preempt time. If the idle timer is greater, the connection is preempted. If set to 255 (def), the connection is never preempted. If set to 0, the connection is disconnected immediately when another application is requested.
Bandwidth/Upper Threshold Write security: 3; Read security: 5
This is the percentage of bandwidth that must be at least present on one B- channel before a second
Bandwidth/Lower Threshold Write security: 3; Read security: 5
This is the percentage of maximum bandwidth the bit rate must go below on two
Bandwidth/Min Channels Write security: 3; Read security: 5
This represents the minimum number of
Bandwidth/Max Channels Write security: 3; Read security: 5
This represents the maximum number of
Bandwidth/Samples
The parameters under this menu control the rate at which the Express L128/ L128T samples the bandwidth on the
Samples/Sample Rate Write security: 3; Read security: 5
This is the time between samples used for calculating data rates on the ISDN call. The value is in seconds and ranges from 1 to 255. The default is 5 seconds.
78 | Express L128/L128T User Manual |
