ADTRAN L128 Dst Port Cmpr, Proto Cmpr, TCP Est, Filter Defines /IPX Filter Defines, Src Net

	Chapter 3: Terminal Menu Operation and Structure
Dst Port Cmpr	Type of comparison that is performed
	= - means ports equal to
	not = - means port not equal to
	> - means port greater than
	< - means port less than
	None - means the destination port is not
	compared
Proto	Protocol used for comparison. Range: 0 to 255.
	(decimal format)
Proto Cmpr	Type of comparison that is performed
	= - means protocols equal to
	not = - means protocols not equal to
	> - means protocols greater than
	< - means protocols less than
	None - means the protocol is not compared
TCP Est	Yes - only when TCP established
	No - only when TCP not established
	Ignore - ignore TCP flags

Filter Defines /IPX Filter Defines

Write security: 2; Read security: 3

The IPX filter defines apply to any IPX packet whether it is routed or bridged. Also, any IPX encapsulation type will be accounted for. Up to 32 IPX defines can be specified.

Name	Identifies the filter entry (15 characters max)
Src Net	32-bit source network address
Src Mask	Bits in the source network address which are
	compared. (hexadecimal format)
Dest Net	32-bit destination network address
Dest Mask	Bits in the destination network address which
	are compared. (hexadecimal format)
Src Socket	16-bit value which is the source socket.
	Range is 0-65535.

Src Socket Comp Type of comparison that is performed:

=- means socket equal to

Not = - means socket not equal to

>- means socket greater than < - means socket less than

None - no comparison is done on source socket

Dest Socket 16-bit value which is the destination socket. Range is 0-65535.

61202.070L1-1 Express L128/L128T User Manual 61