Installing BenchLink Data Logger Software
If you ordered the 34970A with the internal DMM, then the BenchLink
Data Logger software is included. The software is shipped on one
CD-ROM, but includes a utility to build installation floppy disks.
To install the software on your PC, you will need a minimum of 12 MB
of free disk space.
For system requirements and additional d etails on the features of the
software, refer to the specifications in chapt er 9.

Installation Procedure

If you are running Windows 95 or Windows NT 4.0 ®
1. Insert the CD-ROM into your drive.
2. Select Settings | Control Panel from the Start menu. Double-click on
the
Add/Remove Programs icon.
3. Select the Install/Uninstall tab on the Add/Remove Programs property
sheet. Click on Install and follow the on-screen instructions.
If you are running Windows ® 3.1
1. Insert the CD-ROM into your drive.
2. Select File | Run from the Program Manager menu bar.
3. Type <drive>:\setup, where drive is the letter representing your
CD-ROM drive. Click OK to continue and follo w the on-screen
instructions.
Chapter 1 Quick Start
Installing BenchLink Data Logger Software
18