Agilent Technologies 34970A manual Wai

Chapter 5 Remote Interface Reference

Service-Related Commands

*RST

Reset the instrument to the Factory configuration. See “Factory Reset State” on page 160 in chapter 4 for a complete listing of the instrument’s Factory Reset state. This command is equivalent to selecting FACTORY RESET from the front-panel Sto/Rcl Menu.

SYSTem:PRESet

Preset the instrument to a known configuration. See “Instrument Preset State” on page 161 in chapter 4 for a complete listing of the instrument’s preset state. This command is equivalent to selecting PRESET from the front-panel Sto/Rcl Menu.

SYSTem:CPON {100200300ALL}

Reset the module in the specified slot to its power-on state (CPON means “card power on”). To reset all three slots, specify ALL.

SYSTem:VERSion?

Query the instrument to determine the present SCPI version. Returns a string in the form “YYYY.V”, where “YYYY” represents the year of the version, and “V” represents a version number for that year (e.g., 1994.0).

*TST?

Perform a complete self-test of the instrument. Returns “0” if the self-test is successful, or “1” if the test fails.

*WAI

Wait until the completion of the current scan to process any further commands. To abort the scan, send a Device Clear command. Note that this command will wait until the entire scan is complete (may hang indefinitely if a continuous scan is in progress).

*OPC

Set the “Operation Complete” bit (bit 0) in the Standard Event register at the completion of the current scan. Note that this command will wait until the entire scan is complete (may hang indefinitely if a continuous scan is in progress).

5

295