| ESG Family Signal Generators |
Settings conflict; The current data rate is not valid for this radio configuration. Data rate changed to the default rate.
The new radio configuration does not support the current data rate. The data rate changes to the default rate for the new radio configuration, which is 1× for
Settings conflict; Current file length does not have an integer number of symbols. User file size must have symbol boundary in order to transmit the file.
A
Settings conflict; The current paging indicator (PI) is not valid for 2400 bps data rate. The PI has been changed to 0, the default.
QPCH channel with a data rate of 2400 bps only supports up to 191 paging indicators. The PI has been set to 0 (default value) to remain valid for this data rate.
Settings conflict; The current RC or data rate does not support turbo coding. Turbo Coding has been turned off.
Either specification or hardware does not support turbo coding for this data rate. Turbo coding is now turned off. If you wish to use turbo coding, select a valid data rate and then turn turbo coding on. For
Settings conflict; Clipping not allowed for CDMA2000 reverse radio configs 1 and 2. Clipping set to 100%.
The clipping function is not available for the cdma2000 reverse link radio configs 1 and 2. The value is automatically reset to 100% (no clipping).
Settings conflict; Continuous protocol timeslots cannot be turned off.
A continuous protocol timeslot is switched off while in TETRA mode. When a continuous protocol has been selected for a timeslot in TETRA mode, all of the timeslots must be switched on.
34 | Error Messages |
