Agilent Technologies E4400-90333 manual Header contains more than twelve characters see Ieee 488.2

-199 to -100: Command Errors ESG Family Signal Generators

-128Numeric data not allowed

A legal numeric data element was received, but the device does not accept one in this position for the header.

-124Too many digits

The mantissa of a decimal-numeric data element contained more than 255 digits excluding leading zeros (see IEEE 488.2, 7.7.2.4.1).

-123Exponent too large

The magnitude of an exponent was greater than 32000 (see IEEE 488.2, 7.7.2.4.1).

-121Invalid character in number

An invalid character for the data type being parsed was encountered. For example, an alpha in a decimal numeric or a “9” in octal data.

-120Numeric data error

This error, as well as errors -121 through -129, are generated when parsing a data element which appears to be numeric, including non-decimal numeric types. This particular error message is used if the device cannot detect a more specific error.

-114Header suffix out of range

The value of a header suffix attached to a program mnemonic makes the header invalid.

-113Undefined header

The header is syntactically correct, but it is undefined for this specific device. For example, *XYZ is not defined for any device.

-112Program mnemonic too long

The header contains more than twelve characters (see IEEE 488.2, 7.6.1.4.1).

-111Header separator error

A character that is not a legal header separator was encountered while parsing the header.

52 Error Messages