| ESG Family Signal Generators |
Settings conflict; Frequency list and power list are of unequal size. Turn one list off, set one to size one, or make their sizes equal.
The frequency list has more than one element and the power list has more than one element, and they are not of equal size. If any of the frequency, power, or dwell lists have more than one element, they must all have the same number of elements. A list of a single element is the same as a list of an equal size with the single element repeated the necessary number of times.
Settings conflict; The frequency spacing has been limited by the number of tones.
The product of the multitone number of frequencies and frequency spacing must be less than or equal to 15 MHz.
Settings conflict; FSK frequency deviation cannot exceed the symbol rate.
If the FSK frequency deviation exceeds the symbol rate, the deviation is changed to match the value of the symbol rate.
Settings conflict; GSM BERT requires Multiframe PN Sequence in Timeslot E field.
An unsupported data type was encountered. The measurement timeslot requires a multiframe PN sequence in the E field.
Settings conflict; GSM BERT requires Normal as Timeslot Type.
An unsupported timeslot type was encountered. The measurement timeslot must be designated Normal.
Settings conflict; High Amplitude is less than Low Amplitude.
The specified High Amplitude value is smaller than the Low amplitude value for a Sensitivity Search MEASurement? query. No measurement is performed.
Settings conflict; In this configuration the parameter is a constant. It may not be set.
An attempt was made to enter a value into a fixed parameter for the current radio configuration or channel setup. For example, the frame length parameter for the
However, in RC3 and RC4 this parameter is adjustable.
38 | Error Messages |
