ESG Family Signal Generators |
Settings conflict; Continuous & Discontinuous setting conflict. All selected Continuous timeslots are now switched to Discontinuous.
Indicates that while in TETRA mode, an attempt has been made to simultaneously assign continuous and discontinuous protocols to the timeslots. Continuous and discontinuous protocols cannot coexist in TETRA mode. If a discontinuous protocol is selected for any timeslot, all timeslots’ protocols are changed to discontinuous protocols.
Settings conflict; Current frame length does not have symbol boundary. End of frame has been patched with extra bits to allow an integer of symbols in a frame.
With Option UN8, in TDMA format you can select from many different modulations with different bits per symbol. Because all TDMA formats have a fixed frame size, in some modulations
Settings conflict; Discontinuous & Continuous setting conflict. All selected Discontinuous timeslots are now switched to Continuous.
Indicates that while in TETRA mode, an attempt has been made to simultaneously assign discontinuous and continuous protocols to the timeslots. Discontinuous and continuous protocols cannot coexist in TETRA mode. If a continuous protocol is selected for any timeslot, all timeslots’ protocols are changed to continuous protocols.
Settings conflict; Downlink & Uplink setting conflict. All selected Downlink timeslots are now set to Uplink.
A Downlink timeslot type has been selected while another timeslot(s) has Uplink selected. In NADC and PDC digital modulation for bursted data, only either Uplink (base to mobile) or Downlink (mobile to base) Traffic Channel type can be selected for all timeslots at any one moment.To continue data transmission, all Downlink timeslots have been changed to the Uplink configuration.
Settings conflict; EDGE BERT requires Multiframe PN Sequence in Timeslot E field.
An unsupported data type was encountered. The measurement timeslot requires a multiframe PN sequence in the E field.
Error Messages | 35 |
