Agilent Technologies Switch/Measure manual 34925T-001 Terminal Block for Two- or Four-Wire Mode

4Low Frequency Multiplexer Switch Modules

34925T-001 Terminal Block for Two- or Four-Wire Mode

This terminal block with screw- type connections is labeled with the model number and the abbreviated module name. In addition, space is available on the label for you to write the slot number.

N O TE	All modules that connect to the internal DMM are interlock
	protected. This means that when an installed module is exposed (no
	terminal block or cable is connected), the Analog Bus relays are
	open and disconnected from the Analog Buses. See page 96 for
	further information.

N O TE	If you are using an Agilent terminal block to connect your DUT to
	this module be sure to use the 34925T-001 terminal block that
	corresponds to the 2- or 4-wire configuration mode. An error will
	not be generated if you have installed a terminal block that doesn't
	match the present module configuration.

The 34980A Product Reference CD (shipped with the instrument) contains a the 34925T (2- wire mode) Wiring Log for you to document your wiring configuration for this module. You can open the wiring log file in Microsoft® Excel® or Adobe® Acrobat® format.

132 34980A User’s Guide