Dual/Triple Microwave Switch Modules

8

Example: Querying the system for module identify The following command returns the identify of the module installed in slot 7.

SYSTem:CTYPe? 7

Example: Reading the cycle count for a relay The following command reads

back the number of completed cycles for the channel 201 relay of a module installed in slot 6.

DIAGnostic:RELay:CYCLes? (@6201)

Example: Clearing the cycle count for a relay The following command resets the cycle count on the channels 201 and 202 for a module in slot 1.

DIAGnostic:RELay:CYCLes:CLEar (@1201,1202)

Example: Resetting Module(s) to Power-On State The following command resets a module in slot 4 to its power- on state.

SYSTem:CPON 4

Installing SMA Connectors

When installing SMA connectors, it is recommend that you tighten them to 0.8 - 1.1 Nm (7- 10 in- lbs) of torque.

34980A User’s Guide

183

Page 195
Image 195
Agilent Technologies Switch/Measure manual DIAGnosticRELayCYCLes? @6201