Agilent Technologies Switch/Measure Command resets a module in slot 4 to its power- on state

General Purpose Switch Modules 6

Reading Cycle Count and Resetting Modules to Power-On State

Example: Reading the cycle count for a relay (all switch modules) The

following command returns the relay cycle count on channel 7 and channel 16 for a module in slot 1.

DIAGnostic:RELay:CYCLes? (@1007,1016)

Example: Clearing the cycle count for a relay (all switch modules) The

following command resets the relay cycle count on channels 7 and 16 for a module in slot 1.

DIAGnostic:RELay:CYCLes:CLEar (@1007,1016)

Example: Resetting Module(s) to power-on state (all modules) The following

command resets a module in slot 4 to its power- on state.

SYSTem:CPON 4

34980A User’s Guide 167