Agilent Technologies Switch/Measure manual 34933T-002 Terminal Block for One-Wire Mode

Matrix Switch Modules 5

34933T-002 Terminal Block for One-Wire Mode

This terminal block with screw- type connections is labeled with the model number and the abbreviated module name. In addition, space is available on the label for you to write the slot number.

N O TE	All modules that connect to the internal DMM are interlock
	protected. This means that when an installed module is exposed (no
	terminal block or cable is connected), the Analog Bus relays and
	current channels are open and disconnected from the Analog
	Buses. See page 138 for further information.

The 34980A Product Reference CD (shipped with the instrument) contains a the 34933T (1- wire) Wiring Log for you to document your wiring configuration for this module. You can open the wiring log file in Microsoft® Excel® or Adobe® Acrobat® format

N O TE

If you are using an Agilent terminal block to connect your DUT to this module be sure to use the 34933T-002 terminal block that corresponds to the 1-wire configuration mode. Note that an error will not be generated if you have installed a terminal block that doesn't match the present module configuration.

NOTE: Analog Bus connections are on Matrix 3 and 4.

34980A User’s Guide 161