Alcatel-Lucent 6624, 6648, 6600 Series manual Removing the Module, Blank Cover Panel Requirement

Removing Uplink and Stacking Modules OmniSwitch 6600 Series Chassis and Hardware Components

2Once the captive screws are completely disengaged, grasp both captive screws and slowly pull the module out of the slot.

							K	IN	G
					TA	C
			N	/S
	PA	N	SIO
EX
1
									CT
									K/A
									LIN
									CT
									K/A
									LIN

Removing the Module

3Store the module in a secure, static-free location. Placing the module in an anti-static bag is recom- mended.

Blank Cover Panel Requirement

If you are not replacing the uplink or stacking module being removed, be sure to install a blank cover panel (supplied with your switch) over the empty module slot. To install a blank cover panel, follow the steps below.

1Place the blank cover panel over the empty slot and insert two Phillips screws (also supplied with the switch) through the panel and into the threaded holes in the chassis.

2Once the screws are inserted, fasten the panel to the chassis by tightening the screws. Be sure not to overtighten the screws.

page 2-32 OmniSwitch 6600 Series Hardware Users Guide April 2004