Viewing Basic Chassis Information | OmniSwitch 6600 Series Chassis and Hardware Components |
|
|
|
|
Basic Chassis Information
To view basic chassis information (i.e., no installed uplink or stacking modules), enter the show chassis command at the CLI prompt. This command displays the following information:
•Model name, also referred to as chassis type
•Chassis description
•Alcatel part number
•Hardware revision level
•Serial number
•Manufacture date(s)
•Current power and operational status
•Number of times the switch has been reset (i.e., rebooted) since it was last powered up For example:
chassis |
| |
Chassis | 1 | OS6648 , |
Model | Name: | |
Description: | 48PT 10/100 Stack, | |
Part Number: | ||
Hardware Revision: | 210, | |
Serial Number: | 2313283p, | |
Manufacture Date: | FEB 05 2106€, | |
Admin | Status: | POWER ON, |
Operational Status: | UP, | |
Number Of Resets: | 271 | |
For complete descriptions of the command output, refer to the OmniSwitch CLI Reference Guide.
Stacked Configurations. You can use the show chassis command to display information for all switches in a stack, or for a specified switch only. When the show chassis syntax is entered with no specified slot number, information for all switches displays. When a slot position is specified in the command line (e.g., 3), information displays for the corresponding switch only. For detailed information on stacked OmniSwitch 6600 series switches, refer to Chapter 3, “Managing OmniSwitch 6600 Series Stacks.”
page | OmniSwitch 6600 Series Hardware Users Guide April 2004 |
