Installing SFPs OS6600-U24, Inserting the SFP | Alcatel-Lucent 6648

Installing SFPs (OS6600-U24)	OmniSwitch 6600 Series Chassis and Hardware Components

Installing SFPs (OS6600-U24)

OmniSwitch 6600-U24 switches support up to 24 (twenty-four) 100 Mbps Small Form Pluggable (SFP) modules. These SFPs are packaged separately and therefore are not factory-installed. You can install the SFP(s) by following the steps below:

Anti-Static Warning. Before handling any components, free yourself of static by wearing a grounding strap, or by grounding yourself properly. Static discharge can damage the SFP, as well as the switch and uplink module.

1Align the transceiver with the transceiver slot on the OS6600-U24 as shown.

Inserting the SFP

Note. The SFP should slide in easily. Do not force the SFP into the slot. Otherwise you can damage the connectors. If any resistance is encountered, ensure the SFP is aligned and oriented properly, as shown in the diagram above.

2Holding the SFP by its sides, carefully slide it into the desired SFP slot (ports 1–24) until it clicks into place; this is an indication that the connectors are firmly seated.

page 2-40

OmniSwitch 6600 Series Hardware Users Guide April 2004

Image 60

Alcatel-Lucent 6648, 6624, 6600 Series manual Installing SFPs OS6600-U24, Inserting the SFP

Contents

OmniSwitch 6624/6648 Hardware Users Guide OmniSwitch 6600 Series Hardware Users Guide April Contents Contents Blank Cover Panels Index-1 Supported Platforms Unsupported Platforms When Should I Read this Manual? What is in this Manual?What is Not in this Manual? Who Should Read this Manual? Stage 1 Using the Switch for the First Time Stage 2 Gaining Familiarity with Basic Switch FunctionsHow is the Information Organized? Documentation Roadmap Stage 3 Integrating the Switch Into a Network Anytime OmniSwitch 6600 Series Getting Started Guide Related Documentation Technical Support OmniSwitch 6600 Series Stand-Alone and Stacked Configurations Stacked ConfigurationsStand-Alone Availability Features Smart Continuous Switching Software Rollback Hot SwappingHardware Monitoring Automatic Monitoring OmniSwitch 6600 Series Fabric Capacities Port and Fabric CapacitiesUser-Driven Monitoring OS6624/6600-U24 Throughput Application Examples Single Office Building with 1000 Users Medium Campus with 1500 Users OmniPCX Application Examples OmniSwitch 6600 Series Chassis and Hardware Components OmniSwitch 6600 Series Chassis and Hardware Components OmniSwitch OmniSwitch 6624 Front PanelConsole Port 10/100 Ethernet Ports OS6624 Specifications 10/100 Ethernet Port Specifications OmniSwitch 6600-U24 OmniSwitch 6600-U24 Front Panel Console Port Gigabit Ethernet Uplink Module Slot OS6600-U24 Specifications Mbps Ethernet SFP Port Specifications SFP OmniSwitch 6648 Front Panel TM OmniSwitch OS6648 Specifications Status LEDs Front Panel LED Descriptions OS6648 Shown OmniSwitch 6600 Series Rear Panel Redundant Power Supply BayPower Connector Socket Inline Power Connector Rear Panel Mounting the Switch OmniSwitch 6600 Series Chassis Top ViewAirflow Considerations Installation Options Installing the Switch on a Tabletop or Bench Attaching the Switch to the Rack Attaching a Rack-Mount Flange Rack Mounting Stacked Configurations Power Cords SpecificationsPower Cord Types Grounding the Chassis Back Up Power Supply Power Supply RedundancyBack Up Power Supply Front Panel Back Up Power Supply Specifications OmniSwitch 6600 Series Redundant AC Circuit Example Back Up Factory-Installed Primary Power SupplyAC Circuit Back Up Factory-Installed Primary Power Supply Redundant AC Circuit Recommendation Installing a Back Up Power Supply Orienting the Back Up Power SupplyHot Swapping Inserting the Back Up Power Supply Tightening the Captive Screws Removing a Back Up Power Supply Removing the Back Up Power SupplyLoosening the Captive Screws Viewing Primary and Back Up Power Supply Status Blank Cover Panel Requirement Viewing Power Supply Status for Stacked Configurations Slot Number is SpecifiedNo Slot Number is Specified Gigabit Ethernet Uplink Modules OS6600-GNI-U2OS6600-GNI-U2 Gigabit Ethernet Uplink Front Panel MiniGBIC Slots OS6600-GNI-U2 Uplink Module Specifications OS6600-GNI-C2 Uplink Module Specifications OS6600-GNI-C2OS6600-GNI-C2 Gigabit Ethernet Uplink Front Panel Copper Gigabit Ethernet Ports Stacking Module Specifications Hssdc Stacking ConnectorsStacking Module Stacking Module Front Panel Installing Uplink and Stacking Modules Inserting the Uplink or Stacking Module Installing Uplink and Stacking Modules Removing Uplink and Stacking Modules Removing the Module Mini Gigabit Interface Converters MiniGBICs Mini Gigabit Interface Converter MiniGBIC MiniGBIC Specifications MiniGBIC-SX Technical SpecificationsMiniGBIC-LX Technical Specifications MiniGBIC-LH-70 Technical Specifications Installing MiniGBICs Inserting the MiniGBIC OS6648 Shown Installed MiniGBIC OS6648 Shown Removing MiniGBICs Mbps SFPs OS6600-U24 SFP Module Mbps SFP Specifications SFP-100-LC-MM Technical SpecificationsSFP-100-LC-SM15 Technical Specifications SFP-100-LC-SM40 Technical Specifications SFP-100-MTRJ-MM Technical Specifications Mtrj Installing SFPs OS6600-U24 Inserting the SFP Removing SFPs OS6600-U24 Temperature Management Viewing Chassis Temperature Status Viewing Temperature Status for Stacked Configurations Temperature Errors Viewing Fan Status for Stacked Configurations Viewing Fan Status No Slot Number is Specified Chassis Airflow Right Side Air Intake VentLeft Side Fan Exhaust Vents Air Exhaust. The airflow Blank Cover Panels Effects of Missing Blank Panels on Chassis Airflow RS232 Console Port Female DB9 Connector Pinout Pinouts10/100 Ethernet Port RJ-45 Pinout Copper Gigabit Ethernet Port RJ-45 Pinout RJ-45 Console Port Connector Pinout TXD Serial Connection Default Settings Modifying the Serial Connection SettingsConsole Port Serial Connection to the Console Port Additional table output not shown Viewing Basic Chassis Information Hardware Information Slot and Component Information Power on Detailed Slot and Component Information Gbic IBM Basic Primary Slot and Component Information Basic Chassis Information Managing MAC Addresses on the Switch OmniSwitch 6600 Series MAC Range SpecificationsMAC Range Guidelines Determining Current MAC Address Allocation on the Switch Base Chassis MAC Address in Stacked ConfigurationsBase Chassis MAC Address as Unique Identifier Viewing the Base Chassis MAC Address Managing OmniSwitch 6600 Series Stacks This Chapter Specifications and Default Values Parameter Description Configuration Steps Default Value Stack Composed of Four OmniSwitch 6648 Switches Stack Overview Stacking Resiliency and Redundancy Slot Numbers within a Stack CMM Roles in a Stack CMM Role Redundancy Switch Primary CMM CommandsChassis Management and Monitoring Commands File Management Commands Switch Logging and Monitoring Commands Memory Monitoring Commands Setting Up a Stacked Configuration Assigning Slot Numbers Continue to Connecting Cables to Stacking Ports on SEL Button Location Stack of Four Switches with Unique Slot Numbers Slot Numbering ExampleValid Slot Assignments Connecting Cables to Stacking Ports Attaching the Stacking Cable to a Stacking Port Connecting the Switches in the Stack Recommended Redundant Connection Between Switches Connection Failure Between Switches 1 Redundant Stack ConnectionStacking Cable Redundancy Example No Connection Failure Booting the Stack Verifying Slot Number AssignmentsVerifying Primary and Secondary Status for the Stack Idle Status Managing Switches in a Stack Reloading a Switch with a Primary or Secondary CMM RoleReloading the Switch with the Primary CMM Role Reloading the Switch with the Secondary CMM Role Synchronizing Switches in a Stack Restoring Switch Redundancy Changing the Secondary CMM Role to Primary Module Behavior During Takeover Resetting All Switches in a Stack Managing and Monitoring OmniSwitch 6600 Series Stacks Monitoring StacksMonitoring Stack Topology Secondary Active Monitoring Stacks Regulatory Compliance and Safety Information Declaration of Conformity CE Mark Safety Standards Safety and Environmental StandardsStandards Compliance EMC Standards FCC Class A, Part Canada Class a StatementCISPR22 Class a warning Vcci Class a Warning for Taiwan and Other Chinese Markets Translated Safety Warnings Chassis Lifting WarningBlank Panels Warning Electrical Storm Warning Installation Warning Invisible Laser Radiation Warning Lithium Battery Warning Operating Voltage Warning Power Disconnection Warning Proper Earthing Requirement Warning Read Important Safety Information Warning Restricted Access Location Warning Wrist Strap Warning Commit file command Commit system commandCopy flash-synchro command Numerics Reload all command Reload command Show chassis command Show cmm command Show fan commandTakeover command Temp-threshold command