Alcatel-Lucent 6648, 6624 manual Removing Uplink and Stacking Modules, Loosening the Captive Screws

OmniSwitch 6600 Series Chassis and Hardware Components Removing Uplink and Stacking Modules

Removing Uplink and Stacking Modules

To remove an uplink or stacking module from the chassis, follow the steps below:

Anti-Static Warning. Before handling any components, free yourself of static by wearing a grounding strap, or by grounding yourself properly. Static discharge can damage the switch and the uplink or stack- ing module.

1Loosen the two captive screws, located at the left and right sides of the module’s front panel. If neces- sary, use a Phillips screwdriver to loosen the screws.

Note. Be sure that both captive screws are completely disengaged from the threaded holes in the chassis before continuing.

1

2 LINK/ACT LINK/ACT

Loosening the Captive Screws

OmniSwitch 6600 Series Hardware Users Guide April 2004 page 2-31