Alcatel-Lucent 6600 Series, 6648, 6624 manual SEL Button Location

Managing OmniSwitch 6600 Series Stacks Setting Up a Stacked Configuration

2Change the slot number by gently pressing the pointed item into the SEL hole again. Each time the SEL button is pressed, the LED display increases or decreases in increments of one.

					TEM
				PRI
	PS1
OK1					FAN
				SEC
	PS2
OK2
TM				L	E
			N	SO
		O
	C
					TEMP
				PRI
	PS1
OK1					FAN
				SEC
	PS2
OK2

S	E	L			3	4
					9
						16
					32
					7
						14
			24		30
66					5
				28		12
				3
			26		10
			1
					8
					6
				4
			2
S	EL

SEL Button Location

3Continue pressing the SEL button until you reach the number that is one increment higher that the desired slot number, then hold in the SEL button until the LED decreases one increment (to your desired number) and stops flashing.

4Power off the switch.

5Continue steps 1 through 4 for any additional switches that are being assigned new slot numbers.

6Continue to “Connecting Cables to Stacking Ports” on page 3-11.

Note. Refer to the illustration on page 3-10for one of many valid slot numbering possibilities.

OmniSwitch 6600 Series Hardware Users Guide April 2004 page 3-9