Alcatel-Lucent 6648, 6624, 6600 Series manual Redundant AC Circuit Recommendation

OmniSwitch 6600 Series Chassis and Hardware Components Back Up Power Supply

Redundant AC Circuit Recommendation

When a back up power supply is installed, it is recommended that the AC source connected to the back up power supply resides on a separate circuit from the primary power supply. With redundant AC, if a single circuit fails, the switch’s back up power supply (on a separate circuit) will likely be unaffected and the switch can continue operating.

Note. The switch must have a back up power supply installed for the redundant AC circuit recommenda- tion to be applicable.

The diagram below shows a simple redundant AC circuit scenario for OS6600 series switches.

Back Up	Factory-Installed (Primary)
Power Supply	Power Supply
		CAUTION: THIS UNIT MAY BE EQUIPPED	ATTENTION: CET APPAREIL COMPORTE
	!	WITH TWO POWER CONNECTIONS. TO REDUCE PLUS D'UN CORDON D'ALIMENTATION. AFIN DE
		THE RISK OF ELECTRICAL SHOCK, DISCONNECT PREVENIR LES CHOCS ELECTRIQUES, DEBRANCHE
		BOTH POWER CONNECTIONS BEFORE	LES DEUX CORDONS D'ALIMENTATION AVANTE DE
		SERVICING UNIT.	FAIRE LA REPARATION.

			MODEL NO: OS-6648		U.S. PATENT NO. 5,394,402	100/115/230 V
	CAUTION: THIS UNIT MAY BE EQUIPPED		RATING: 100-240V	50-60Hz, 1.02A	LISTED
			THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
	WITH TWO POWER CONNECTIONS. TO REDUCE		IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:		I.T.E.
	THE RISK OF ELECTRICAL SHOCK, DISCONNECT		(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND		5Z71
	BOTH POWER CONNECTIONS BEFORE		(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING		E164613C
!	SERVICING UNIT.	100/115/230 V	INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
			THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE
	ATTENTION: CET APPAREIL COMPORTE	50/60 Hz, 2/2/1 A				LAN PWR PORT
	PLUS D'UN CORDON D'ALIMENTATION. AFIN DE		CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
	PREVENIR LES CHOCS ELECTRIQUES, DEBRANCHE		CET APPAREIL NUMÉRIQUE DE LA CLASSE A RESPECTE TOUTS LES
	LES DEUX CORDONS D'ALIMENTATION AVANTE DE
	FAIRE LA REPARATION.		EXIGENCES DU REGLEMENT SUR LE MATÉRIEL BROUILLEUR DU CANADA.
				Assembled in the US of US and Non-US Components

AC Circuit 1

Both the primary and redundant power supplies are installed in the chassis, providing power supply redundancy.

Each power supply is connected to an AC source on a separate circuit.

AC Circuit 2

Back Up	Factory-Installed (Primary)
Power Supply	Power Supply
		CAUTION: THIS UNIT MAY BE EQUIPPED	ATTENTION: CET APPAREIL COMPORTE
	!	WITH TWO POWER CONNECTIONS. TO REDUCE PLUS D'UN CORDON D'ALIMENTATION. AFIN DE
		THE RISK OF ELECTRICAL SHOCK, DISCONNECT PREVENIR LES CHOCS ELECTRIQUES, DEBRANCHE
		BOTH POWER CONNECTIONS BEFORE	LES DEUX CORDONS D'ALIMENTATION AVANTE DE
		SERVICING UNIT.	FAIRE LA REPARATION.

			MODEL NO: OS-6648		U.S. PATENT NO. 5,394,402	100/115/230 V
	CAUTION: THIS UNIT MAY BE EQUIPPED		RATING: 100-240V	50-60Hz, 1.02A	LISTED
			THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
	WITH TWO POWER CONNECTIONS. TO REDUCE		IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:		I.T.E.
	THE RISK OF ELECTRICAL SHOCK, DISCONNECT		(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND		5Z71
	BOTH POWER CONNECTIONS BEFORE		(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING		E164613C
!	SERVICING UNIT.	100/115/230 V	INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
			THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE
	ATTENTION: CET APPAREIL COMPORTE	50/60 Hz, 2/2/1 A				LAN PWR PORT
	PLUS D'UN CORDON D'ALIMENTATION. AFIN DE		CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
	PREVENIR LES CHOCS ELECTRIQUES, DEBRANCHE		CET APPAREIL NUMÉRIQUE DE LA CLASSE A RESPECTE TOUTS LES
	LES DEUX CORDONS D'ALIMENTATION AVANTE DE
	FAIRE LA REPARATION.		EXIGENCES DU REGLEMENT SUR LE MATÉRIEL BROUILLEUR DU CANADA.
				Assembled in the US of US and Non-US Components

!

AC 1

In the event of a failure at circuit 1 (for example, a tripped circuit breaker), the redundant power supply plugged into the grounded AC outlet on circuit 2 allows switch operations to continue.

AC Circuit 2

OmniSwitch 6600 Series Redundant AC Circuit Example

OmniSwitch 6600 Series Hardware Users Guide April 2004 page 2-19