Allied Telesis AT-IFS802SP manual System Event Log, Backup Configuration, Syslog Configuration

32 AT-IFS802SP-80 User Manual

6.7.3 Backup Configuration

You can back up the current configuration from flash ROM to the TFTP server for the purpose of recovering the configuration later. It helps you to avoid wasting time on configuring the settings by backing up the configuration.

•TFTP Server IP Address:Type in the TFTP server IP.

•Backup File Name:Type in the file name.

•Click Apply

Backup Configuration interface

6.8 System Event Log

This page allows the user to decide whether to send the system event log, and select the mode which the system event log will be sent to client only, server only, or both client and server. What kind of event log will be issued to the client/server depends on the selection on the Event Configuration tab. There are five types of event—Device Cold Start, Device Warm Start,Authentication Failure, X-Ring Topology Change, and Port Event—available to be issued as the event log.

6.8.1Syslog Configuration

•Syslog Client Mode: Select the system log mode—Client Only, Server Only, or Both. ‘Client

Only’ means the system event log will only be sent to this interface of the switch, but on the other hand ‘Server Only’ means the system log will only be sent to the remote system log server with its IP assigned. If the mode is set in ‘Both’, the system event log will be sent to the remote server and this interface.

•System Log Server IP Address:When the ‘Syslog Mode’ item is set as Server Only/Both, the user has to assign the system log server IP address to which the log will be sent.

• Click Reload to refresh the event log displaying area.

•Click Clear to clear all the current event logs.

•Make sure the selected mode is correct, and click Apply to have the setting take effect.