Allied Telesis AT-IFS802SP manual Introduction, Hardware Features

6 AT-IFS802SP-80 User Manual

Chapter 1 Introduction

The 8 10/100TX + 2 10/100/1000T/SFP Combo with X-Ring L2 Managed Industrial Switch is a cost-effective solution and meets the high reliability requirements demanded by industrial applications.The 8 10/100TX + 2 10/100/1000T/SFP Combo with X-Ring L2 Managed Industrial Switch can be easily managed through the

Web GUI. Using fiber port can extend the connection distance that increases the network elasticity and

performance. It also provides the X-Ring function that can prevent the network connection failure.

1.1 Hardware Features

	IEEE 802.3 10Base-T Ethernet
	IEEE 802.3u 100Base-TX
	IEEE802.3ab 1000Base-T
	IEEE802.3z Gigabit fiber
	IEEE802.3x Flow Control and Back Pressure
Standard	IEEE802.3ad Port trunk with LACP
	IEEE802.1d Spanning Tree/ IEEE802.1w Rapid Spanning Tree
	IEEE802.1p Class of Service
	IEEE802.1Q VLAN Tag
	IEEE 802.1x User Authentication (Radius)
	IEEE802.1ab LLDP
Switch	Back-plane (Switching Fabric): 5.6Gbps
Architecture	Packet throughput ability(Full-Duplex): 8.3Mpps @64bytes
	14,880pps for Ethernet port
Transfer Rate	148,800pps for Fast Ethernet port
	1,488,000pps for Gigabit Fiber Ethernet port
Packet Buffer	1Mbits
MAC Address	8K MAC address table
Flash ROM	4Mbytes
DRAM	32Mbytes
	10/100TX: 8 x RJ-45
Connector	10/100/1000T/ SFP Combo: 2 x RJ-45 + 2 x
	100/1000 SFP sockets
	RS-232 connector: RJ-45 type