Allied Telesis AT-IFS802SP manual Appendix B-Command Sets, 21.3

4 AT-IFS802SP-80 User Manual

6.9	Fault Relay Alarm		36
6.10	SNTP Configuration		36
6.11	IP Security		39
6.12 User Authentication			40
6.13	Port Statistics		40
6.14	Port Control		41
6.15	Port Trunk		42
6.15.1 Aggregator setting			42
6.15.2 Aggregator Information			44
6.15.3		State Activity	47
6.16	Port Mirroring		48
6.17	Rate Limiting		49
6.18	VLAN configuration		50
6.18.1		Port-based VLAN	50
6.18.2		802.1Q VLAN	52
		802.1Q Configuration	53
6.19	Rapid Spanning Tree		55
6.19.1		RSTP System Configuration	55
6.19.2		Port Configuration	56
6.20	SNMP Configuration		57
6.20.1		System Configuration	57
6.20.2 Trap Configuration			58
6.20.3		SNMPV3 Configuration	59
6.21	QoS Configuration		60
6.21.1		QoS Policy and Priority Type	60
6.21.2		Port-based Priority	61
6.22	IGMP Configuration		62
6.21.3		COS Configuration	62
6.21.4 TOS Configuration			62
6.23	X-Ring		63
6.24	LLDP Configuration		65
6.25	Security—802.1X/Radius Configuration		65
6.25.1		System Configuration	65
6.25.2		Port Configuration	66
6.25.3		Misc Configuration	67
6.26	MAC Address Table		67
6.26.1		Static MAC Address	67
6.26.2		MAC Filtering	68
6.26.3 All MAC Addresses			69
6.26.4		MAC Address Table—Multicast Filtering	69
6.27	Factory Default		71
6.28	Save Configuration		71
6.29	System Reboot		71
Troubles shooting			72
Appendix A—RJ-45 Pin Assignment			73
Appendix B—Command Sets			76

System Commands Set	76
Port Commands Set	78
Trunk Commands Set	80