Allied Telesis AT-IFS802SP manual DIN-Rail Mounting

14 AT-IFS802SP-80 User Manual

3.2 DIN-Rail Mounting

The DIN-Rail is screwed on the industrial switch when out of factory. If the DIN-Rail is not screwed on the industrial switch, please see the following pictures to screw the DIN-Rail on the switch. Follow the steps below to hang the industrial switch.

1. First, insert the top of DIN-Rail into the track. 2. Then, lightly push the DIN-Rail into the track.

3.Check if the DIN-Rail is tightened on the track or not.

4.To remove the industrial switch from the track, reverse above steps.