Allied Telesis AT-IFS802SP manual Port Commands Set, Portid, Duplex full half, 101001000auto

78 AT-IFS802SP-80 User Manual

Port Commands Set

Netstar Commands	Level	Description	Example
interface fastEthernet	G	Choose the port for	switch(config)#interface fastEthernet 2
[Portid]		modification.
		Use the duplex
duplex [full half]	I	configuration command to	switch(config)#interface fastEthernet 2
		specify the duplex mode of	switch(config-if)#duplex full
		operation for Fast Ethernet.
		Use the speed
		configuration command to
Speed		specify the speed mode of	switch(config)#interface fastEthernet 2
	I	operation for Fast Ethernet.,	switch(config-if)#speed 100
[101001000auto]
		the speed can’t be set to
		1000 if the port isn’t a giga
		port..
no flowcontrol	I	Disable flow control of	switch(config-if)#no flowcontrol
		interface
security enable	I	Enable security of interface	switch(config)#interface fastEthernet 2
			switch(config-if)#security enable
no security	I	Disable security of interface	switch(config)#interface fastEthernet 2
			switch(config-if)#no security
		Set interface ingress limit	switch(config)#interface fastEthernet 2
bandwidth type all	I	frame type to “accept all
			switch(config-if)#bandwidth type all
		frame”
bandwidth type		Set interface ingress limit	switch(config)#interface fastEthernet 2
		frame type to “accept
broadcast-multicast-	I		switch(config-if)#bandwidth type
		broadcast, multicast, and
flooded-unicast			broadcast-multicast-flooded-unicast
		flooded unicast frame”
		Set interface ingress limit	switch(config)#interface
bandwidth type	I	frame type to “accept	fastEthernet 2
broadcast-multicast		broadcast and multicast	switch(config-if)#bandwidth type
		frame”	broadcast-multicast
bandwidth type		Set interface ingress limit	switch(config)#interface fastEthernet 2
	I	frame type to “only accept	switch(config-if)#bandwidth type
broadcast-only
		broadcast frame”	broadcast-only
		Set interface input
		bandwidth. Rate Range is
bandwidth in [Value]	I	from 100 kbps to 102400	switch(config)#interface fastEthernet 2
		kbps or to 256000 kbps for	switch(config-if)#bandwidth in 100
		giga ports, and zero means
		no limit.