43 |
•Work ports:This column field allows the user to type in the total number of active port up to four. With LACP static trunk group, e.g. you assign four ports to be the members of a trunk group whose work ports column field is set as two; the exceed ports are standby/ redundant ports and can be aggregated if working ports fail. If it is a static trunk group
• Select the ports to join the trunk group. The system allows a maximum of four ports to be aggregated in a trunk group. Click Add and the ports focused in the right side will be shifted to the left side.To remove unwanted ports, select the ports and click Remove .
•When LACP enabled, you can configure LACP Active/Passive status for each port on the
State Activity tab.
•Click Apply 
.
• Use Delete 
to delete Trunk Group. Select the Group ID and click Delete 
.
Port
