C H A P T E R 2
Installation
These steps describe procedures for installing and configuring the AltiTouch 500:
1.Plug one end of the flat telephone line cord into the line jack on the back of the phone where it is labeled TEL.LINE and plug the other end into your modular telephone wall jack.
2.Connect the AC adapter to an electrical wall outlet and then connect the AC adapter plug to the “DC 9V” jack on the back of the phone. Use only with a Class 2 power source, plug polarity, 9V DC, AC adapter.
Figure 2. AltiTouch 500 Connections
3.Connect one end of the coiled Handset Cord to the jack on the left side of the phone and connect the other end of the coiled Handset Cord to the jack on the handset
4.If you wish to use an Answering Machine, Modem, Fax Machine or other devices along with your Caller ID telephone, you may plug one of these devices into the DATA jack on the right side of the phone. The important thing to remember is that for the Caller ID features to work properly the Caller ID telephone must be plugged directly into the wall jack and other devices must be plugged into the Caller ID phone.
5.Selecting a language
