1.Press the Save button when the display shows no caller's number or name. The “SAVE TO?” prompt appears on the display.
2.Press the Directory button, the “ENTER NUMBER>” prompt appears on the display.
3.Use the keypad to enter the telephone number, including trunk access code and the long distance prefix that you need to dial this number. Insert a pause or multiple pauses where required by
using the Pause button. Then press the Save button.
Note: If you need to dial an outside number, you will need to include the trunk access code in the phone number you entered.
4.The third line of LCD alternately displays the entered number and “USE SAVE TO END.”
5.Use the keypad to input the first character of the name. The number and
letters on each telephone button are displayed in turn.
6.When the desired character is displayed, you can enter the next character.
7.If you have to use the same button to enter the next character, press the ∃ button to move the cursor to the next position and enter the next character.
8.If you will use a different button to enter the next character, simply press that button. The cursor will move to the next position automatically.
9.To insert a space, the ∃ button to move the cursor to the right.
10.To
11.After entering all characters, press the Save button to save this number/name in the directory.
