Unit Object Commands

/cx stop mediascan

This command applies only to 7000/8000 controllers.

This commands stops a media scan operation on the specified controller /cx. (Media scans are started using /cx start mediascan.)

Unit Object Commands

Unit Object commands provide information and perform actions related to a specific unit, such as /c0/u1 (unit 1 on controller 0). For example, you use logical disk object commands for such tasks as seeing the rebuild, verify, or initialize status of a unit, starting, stopping, and resuming rebuilds and verifies, and setting policies for the unit.

Syntax

/cx/ux show

/cx/ux show attribute [attribute ...] where attributes are: initializestatuscachename(9000 series) qpolicy(9550SX, 9590SE, 9650SE)rebuildstatus serial(9000 series)statusverifystatus storsave(9550SX, 9590SE, 9650SE)volumes(9000 series) ignoreECC (9000 series)identify (9550SX, 9590SE, 9650SE)

/cx/ux show all

/cx/ux start rebuild disk=<p:-p...> [ignoreECC]

/cx/ux start verify

(7000/8000 only)

/cx/ux pause rebuild

/cx/ux resume rebuild

(7000/8000 only)

/cx/ux stop verify

 

/cx/ux flush

 

/cx/ux del [noscan] [quiet]

 

/cx/ux set autoverify=onoff

 

/cx/ux set cache=onoff [quiet]

(9550SX, 9590SE, 9650SE only)

/cx/ux set identify=onoff

/cx/ux set ignoreECC=onoff

(9550SX, 9590SE, 9650SE only)

/cx/ux set qpolicy=onoff

/cx/ux set name=string

(9000 series)

/cx/ux set storsave=protectbalanceperform [quiet](9550SX, 9590SE, 9650SE)

/cx/ux migrate type=RaidType [disk=p:-p] [group=345678] [stripe=Stripe] [noscan] [nocache] [autoverify]

(9000 series) RaidType = {raid0, raid1, raid5, raid6(9650SE only), raid10, raid50, single}

/cx/ux remove [noscan] [quiet]

www.3ware.com

59

Page 65
Image 65
AMCC 9500S, 9550SX, 9590SE, 9650SE manual Unit Object Commands, Cx stop mediascan