AMCC 9590SE, 9550SX, 9500S, 9650SE manual Example of migrate output

Chapter 2. CLI Syntax Reference

Example of migrate output

The following is an example of how migrating units will be displayed. In this example, the report indicates that /c0/u3 is a migrating unit with 39% completion. The report also indicate that Source Unit su0 is of type RAID-1 and Destination Unit du0 is of type RAID-10.

3ware	CLI> /c0 show
Unit	UnitType Status	%RCmpl %V/I/M Stripe Size(GB) Cache AVrfy

---------------------------------------------------------------------------

u0	RAID-5	OK		-	-	64K	596.004	ON	OFF
u2	SPARE	OK		-	-	-	149.042	-	OFF
u3	Migrator	MIGRATING		-	39	-	149.001	ON	OFF
Port	Status		Unit	Size		Blocks	Serial
---------------------------------------------------------------
p0	OK		u0	149.05	GB	312581808	WD-WCANM1771318
p1	OK		u0	149.05	GB	312581808	WD-WCANM1757592
p2	OK		u0	149.05	GB	312581808	WD-WCANM1782201
p3	OK		u0	149.05	GB	312581808	WD-WCANM1753998
p4	OK		u2	149.05	GB	312581808	WD-WCANM1766952
p5	OK		u3	149.05	GB	312581808	WD-WCANM1882472
p6	OK		u0	149.05	GB	312581808	WD-WCANM1883862
p7	OK		u3	149.05	GB	312581808	WD-WCANM1778008
p8	OK		-	149.05	GB	312581808	WD-WCANM1770998
p9	NOT-PRESENT		-	-	GB	-	-
p10	OK		u3	149.05		312581808	WD-WCANM1869003
p11	OK		u3	149.05	GB	312581808	WD-WCANM1762464
3ware CLI> /c0/u0 show
Unit	UnitType		Status	%RCmpl		%V/I/M Port	Stripe	Size(GB)

------------------------------------------------------------------------

u3	Migrator	MIGRATING	-	39	-	-	-
su3	RAID-1	OK	-	-	-	-	149.001
su3-0	DISK	OK	-	-	p5	-	149.001
su3-1	DISK	OK	-	-	p7	-	149.001
su3/v0	Volume	-	-	-	-	-	149.001
du3	RAID-10	OK	-	-	-	16K	298.002
du3-0	RAID-1	OK	-	-	-	-	-
du3-0-0	DISK	OK	-	-	p5	-	149.001
du3-0-1	DISK	OK	-	-	p7	-	149.001
du3-1	RAID-1	OK	-	-	-	-	-
du3-1-0	DISK	OK	-	-	p10	-	149.001
du3-1-1	DISK	OK	-	-	p11	-	149.001
du3/v0	Volume	-	-	-	-	-	149.001

76 3ware Serial ATA RAID Controller CLI Guide