Chapter 2. CLI Syntax Reference
show alarms [reverse]
This command shows the alarms or AEN messages of all controllers in the system. The default is to display the most recent message first. The reverse attribute displays the most recent message last.
show diag
This command shows the diagnostic information of all controllers in the system.
show rebuild
This command displays all rebuild schedules for the 9000 controllers in the system.
The rebuild rate is also applicable for initializing, migrating, and recovery background tasks.
Example:
//localhost> show rebuild
Rebuild Schedule for Controller /c0
========================================================
Slot Day Hour Duration Status
1 | Sun | 12:00am | 24 | hr(s) | disabled |
2 | Mon | 12:00am | 24 | hr(s) | disabled |
3 | Tue | 12:00am | 24 | hr(s) | disabled |
4 | Wed | 12:00am | 24 | hr(s) | disabled |
5 | Thu | 12:00am | 24 | hr(s) | disabled |
6 | Fri | 12:00am | 24 | hr(s) | disabled |
7 | Sat | 12:00am | 24 | hr(s) | disabled |
For additional information about rebuild schedules, see “/cx add rebuild=ddd:hh:duration” on page 50, and see the discussion of background tasks and schedules in 3ware Serial ATA RAID Controller User Guide.
26 | 3ware Serial ATA RAID Controller CLI Guide |
