AMCC 9500S, 9550SX, 9590SE, 9650SE Cx/ux start verify, Cx/ux pause rebuild, Cx/ux resume rebuild

Unit Object Commands

/cx/ux start verify

This command starts a background verification process on the specified unit /cx/ux. The following table shows the supported matrix as a function of the controller model and logical unit type.

N/A (Not Applicable) refers to cases where the given logical unit type is not supported on that controller model.

Table 9: Supported RAID (Logical Unit) Types for Verification

Model	R0	R1	R5	R6	R10	R50	Single	JBOD	Spare
7K/8K	No	Yes	Yes	N/A	Yes	N/A	N/A	No	No
9000a	Yes	Yes	Yes	N/A	Yes	Yes	Yes	Yes	Yes
9650SE	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

a. Models 9500S, 9550SX, and 9590SE

When you issue this command, the specified verify will begin if schedules are disabled; otherwise it will pause until the next scheduled verify. Verify will also pause if a rebuild or initialization is currently in progress.

/cx/ux pause rebuild

This command allows you to pause the rebuild operation on the specified unit /cx/ux.

This feature is only supported on the 7000/8000 series controllers. 9000 series controllers have an on-board scheduler where rebuild operations can be scheduled to take place at specified start and stop times. The /cx/ux pause rebuild command is provided to enable 7000/8000 users to achieve similar functionality with use of Linux-provided schedulers such as cron(8) or at(1), or user-supplied programs.

/cx/ux resume rebuild

This command allows you to resume the rebuild operation on the specified unit /cx/ux.

This feature is intended only for 7000/8000 series controllers. 9000 series controllers have an on-board scheduler where rebuild operations can be scheduled to take place at specified start and stop times. The /cx/ux resume rebuild function is provided to enable 7000/8000 users to achieve similar

www.3ware.com 67