AMCC 9550SX, 9500S, 9590SE Cx show numports, Cx show numunits, Cx show ctlbus, Cx show exportjbod

Chapter 2. CLI Syntax Reference

/cx show numports

This command reports the port capacity (number of physical ports) of the specified controller /cx.

Example:

//localhost> /c0 show numports /c0 Number of Ports = 12

/cx show numunits

This command reports the number of units currently managed by the specified controller /cx. This report does not include off-line units (or removed units).

Example:

//localhost> /c0 show numunits /c0 Number of Units = 1

/cx show ctlbus

This feature only applies to 9550SX, 9590SE, and 9650SE controllers.

This command reports the controller host bus type, bus speed, and bus width.

Example:

//localhost> /c0 show ctlbus /c0 Controller Bus Type = PCIX /c0 Controller Bus Width = 64 bits /c0 Controller Bus Speed = 133 Mhz

/cx show exportjbod

This feature only applies to 9000 series controllers.

This command reports the current JBOD Export Policy: on, off, or Not

Supported.

Example:

//localhost> /c0 show exportjbod

/c0 JBOD Export Policy = Not Supported. //localhost> /c1 show exportjbod

/c1 JBOD Export Policy = on

34 3ware Serial ATA RAID Controller CLI Guide