MVP-WDS Wall Docking Station & CB-MVPWDS Conduit Box

Specifications

MVP-WDS Specifications

Dimensions (HWD):

• 8.59" x 12.66" x 3.40" (21.82 cm x 32.16 cm x 8.64 cm)

 

Note: Always use the cutout/installation dimensions for the MVP-WDS

 

when installing this unit into various surfaces. This SP engineering drawing

 

is available online at www.amx.com. Refer to the Installation section on

 

page 4 for details.

 

 

Power Requirements:

Stand-alone with no batteries: 0.1 A @ 12 VDC

 

Stand-alone charging two batteries: 2.1 A @ 12 VDC

 

• With no batteries and charging a connected MVP panel’s two internal

 

batteries: 3.3 A @ 12 VDC

 

• With two batteries and charging a connected MVP panel’s two internal

 

batteries: 3.3 A @ 12 VDC

 

 

Weight:

Stand-alone: 4.67 lbs (1.89 kg)

 

• With two batteries: 5.47 lbs (2.48 kg)

 

 

Available Colors:

MVP-WDS (Black) - FG5965-11

 

MVP-WDS (Silver) - FG5965-21

 

 

Charging Features:

• Two Battery Bays: Simultaneous Charging

 

• Charge time for two depleted batteries ~ 5 hours

 

 

Front Panel Components:

• Securing Magnet

 

• Security Latch: Adds the primary layer of security when mounting the MVP.

 

When the MVP is inserted, this latch grabs onto the rear of the MVP and

 

secures it from being removed.

 

• Interface Connector Pins: A set of retractable pins (male) that connect to

 

the underside MVP connector strip. This connection provides both

 

communication and power between the MVP and the MVP-WDS.

 

• Support Cradle: This retractable mechanism supports a resting MVP panel

 

and allows a user to either insert or remove a connected MVP panel.

 

• LEDs: Two blue LEDs indicate either:

 

- Left LED monitors the battery status within either the MVP-WDS or MVP

 

- Right LED monitors communication between the MVP-WDS and MVP.

 

• Security Release pushbutton: Located on the front of the unit, this

 

pushbutton toggles an on-screen security keypad (if security is enabled).

 

- Entering the correct release code allows the MVP-WDS to release the

 

MVP from the security latch.

 

• Battery Compartment: Houses up to two MVP-BP batteries.

 

 

Side Panel Components:

• Host USB Connectors: Two type A USB ports connect an external

 

keyboard and mouse device for use with the G4 Computer Control

 

application.

 

• Power Connector: 2-pin 3.5 mm mini-Phoenix (male) connector.

 

 

Operating/Storage

• Operating Temperature: 0° C (32° F) to 40° C (104° F)

Environments:

• Operating Humidity: 20% - 85% RH

 

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

 

• Storage Humidity: 5% - 85% RH

 

 

Included Accessories:

• Installation Kit (KA2250-01):

 

- One 2-pin 3.5 mm mini-Phoenix connector (41-5025)

 

- One strip containing two plastic Die Cut Foam covers (60-5965-47)

 

- Two #6-32 Faceplate Securing screws (80-0193-01)

 

- Four Phillips-head screws (#4-32 x 0.250 Black) (80-0112)

 

- Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192)

 

 

2

MVP-WDS Wall Docking Station for MVP Panels

Page 8
Image 8
AMX manual MVP-WDS Specifications