Chapter 7Use With Other Instruments7-1 INTRODUCTION This chapter provides information and instructions for using the Se-
ries 681XXC Synthesized Signal Generator with other Anritsu instu-
ments. It contains the following:
qInstructions for interconnecting and operating any two 68XXXC
and/or 68XXXB instruments in a master-slave configuration.
qInstructions for connecting the 681XXC to an Anritsu Model
56100AScalar Network Analyzer so that it can be used as a
signal source for the analyzer.
qInstructions for connecting the 681XXC to a Anritsu Model 360B
VectorNetwork Analyzer and configuring the signal generator so
that it can be used as a signal source for the analyzer.
qInstructions for connecting the 681XXC to a Hewlett Packard
Model 8757D Scalar Network Analyzer and setting up the signal
generator so that it can be used as a signal source for the ana-
lyzer.