Selecting a
CW
Frequency
There are several ways to select a CW frequency for
output. Youcan (1) edit the current frequency, (2)
enter a new frequency,or (3) select one of the 20 pre-
set frequency parameters.
Editing the Current Frequency
Press Edit F1 to open the frequency parameter,
then edit the current CW frequency using the cursor
control key or the rotary data knob. Toclose the
open frequency parameter,press Edit F1 or make
another menu selection.
Entering a New Frequency
Press Edit F1 to open the frequency parameter,
then enter the new CW frequency using the keypad
and appropriate terminator key.To close the open
frequency parameter,press Edit F1 or make an-
other menu selection.
Selecting a Preset Frequency
Toselect one of the preset frequencies for output,
press the main menu key
FREQUENCY
CONTROL
The CW Frequency Control Menu (below) is dis-
played.
This menu lets youperform the following:
qSelect preset frequencies F0,F1,F2,M1,orM2
for output.
qGo to the frequency list menu (to tag, edit,or
output a frequency from the list).
qGo to the tagged frequencies menu (select a
tagged frequency for output).
3-22 681XXC OMLOCAL (FRONT CW FREQUENCY
PANEL) OPERATION OPERATION