and appropriate terminator key.To close the open
power level parameter,press Edit L1 ormake an-
other menu selection.
Selecting a Preset Power Level
Toselect one of the preset power levels for output,
press the main menu key
LEVEL
CONTROL
The Level Control menu (below) is displayed.
This menu lets you perform the following:
qSelect preset power levels L0,L1,L2,L3,orL4
for output.
qGo to the Level List menu.
qGo to the TaggedLevels menu.
Press Log/Linear to select power level units. When
Log is selected, units are in dBm; when Linear is se-
lected, units are in mV.The soft-key label is high-
lighted (in reverse video) to reflect your selection.
Level List– Togo to the Level List menu (below),
press Level List .
This menu lets you select a power level from the list
to tag, edit, or output.
3-50 681XXC OMLOCAL (FRONT FIXED POWER
PANEL) OPERATION LEVEL OPERATION
NOTE
When Linear power level units are
selected,use the following termina-
torkeys forpower leveldata entries:
GHz / Sec / dBm for V
MHz/ms/dBfor mV
kHz / ms / STEPS for mV