This menu lets you perform the following:
qSelect a sweep range (edit the sweep start and
stop frequency parameters).
qGo to the sweep ramp menu (set the sweep
time and select a sweep trigger).
qSelect an output power level for the sweep.
qGo to the alternate sweep menu.
Setting Sweep
Time Togo to the Analog Sweep Ramp menu (below) from
the Analog Sweep menu, press Sweep Ramp .
This menu lets you set the sweep time and go to the
trigger menu.
Toopen the sweep time parameter for editing, press
Sweep Time. Edit the current sweep time using the
cursor control key or the rotary data knob or enter a
new sweep time using the key pad and appropriate
termination key.To close the open sweep time pa-
rameter once you have set the desired time, press
Sweep Time or make another menu selection.
Togo to the Analog Sweep Trigger menu from this
menu, press TriggerMenu . Sweep trigger is de-
scribed on the next page.
Press Previous Menu to return to the Analog Sweep
Menu display.
681XXC OM 3-27
LOCAL (FRONT SWEEP FREQUENCY
PANEL) OPERATION OPERATION