Setting
Increment
Sizes
The Increment menu lets you set the incremental
size for editing frequency,power level, and time pa-
rameters. When the increment mode is selected on,
these parameter values will increase or decrease by
the set amount each time the Ùor Úpad is pressed
or the rotary data knob is turned clockwise or coun-
ter-clockwise. The menu also lets you turn the incre-
ment mode on and off.
Togo to the Increment menu from the System Con-
figuration menu, press Incr Menu . The Increment
Menu (below) is displayed.
Press Freq Incr to open the frequency increment
parameter.
Press Level Incr to open the power level increment
parameter.
Press TimeIncr to open the time increment
parameter.
Open the parameter you wish to change, then edit
the current value using the cursor control key or
rotary data knob or enter a new value using the key
pad and appropriate termination key.When you
have finished setting the open parameter,close it by
pressing its menu soft-key or by making another
menu selection.
Press Incr Mode to turn the increment mode on.
Press again to turn it off.
When done, press Previous Menu to return to the
System Configuration Menu display.
3-88 681XXC OMLOCAL (FRONT SYSTEM
PANEL) OPERATION CONFIGURATION